CompuWeigh Corporation • 203-262-9400 • http://www.compuweigh.com
With a commodity as valuable as dry edible beans, getting accurate weights is critical. But accuracy wasn’t happening at privately-held Larson Grain Co.’s bean plant in Englevale, ND (701-683-5246).
Of Larson Grain’s six elevators around southeastern North Dakota, Englevale is the only one handling dry beans – pinto, black, and small red. The company loads dry beans onto a single covered hopper car at a time on the Red River Valley & Western Railroad and ships them to customers throughout the United States and for export.
“We had been loading beans using an older-style mechanical hopper scale,” says General Manager Nick Shockman, who has been with Larson Grain for 12 years.
“Our weights had never been 100% accurate,” he says. “We’ve had to pay for a third party or a railroad to weigh cars. If you underload a car, you have an angry customer. If you overload a car, you’re giving away free product.”
General Manager Nick Shockman with the new CompuWeigh process hopper scale.
The company decided to look into a means of generating accurate origin weights. “We went on the Internet and found CompuWeigh Corp. (Woodbury, CT; 203-262-9400),” Shockman says. “Tim Ciucci (senior vice president of sales and marketing) came out and showed us their process hopper scale.”
Larson Grain’s employees liked what they saw and purchased the scale in fall 2016 immediately after harvest.
The pneumatically-powered scale, using air supplied by Larson Grain, is located at a warm, indoor location well away from the elements. However, Larson Grain mounted the device on caster wheels, in order to make it portable.
Dry edible beans destined for rail shipment are fed into the scale’s upper garner at a rate of 35,000 lbs. (350 cwt.) per hour. The operator utilizes a CompuWeigh DWC-400 Weight Controller to operate the machine.
A keypad allows the operator to type in customer name, order number, product, total weight, and draft weight.
Beans are deposited directly into the upper garner from a fixed overhead spout centered over the device at approximately 35,000 lbs. per hour. With a density for dry edible beans calculated at 48 lbs. per cubic foot and a 10-cubic-foot weigh hopper, each draft totals a 480 lbs.
That may seem very small by today’s high-speed grain handling capacities, but dry edible beans are relatively fragile, and customers demand strict limits on broken kernels. Larson Grain loads a single railcar at a time adjacent to the building.
After weighing, beans discharge directly onto a drag conveyor leading to a leg and spout that loads beans onto the railcar or alternatively tote bags.
Larson Grain added a tape printer next to the unit allowing scale tickets to be printed. The setup allows weights to be certified by an independent third party.
Shockman says that using the new process hopper scale, it takes approximately five hours to load a railcar.
Reprinted from GRAIN JOURNAL January/February 2017 Issue