Bin Unloaders/Sweeps

Efficiently unload and sweep grain tanks with the right combination of power and capacity with the bin sweeps offered by these grain and feed industry companies. Reduce labor and promote safety with zero-entry models. Bin unloaders and sweeps can be fit to a variety of tank diameters for retro-fit and new installations handling a variety of commodities. Learn more by requesting information from the companies listed below by using the form at the bottom of the page.


To request more info, check the box(es), fill out the form below, and your request will be submitted.


Integral Sweep Augers

  • For cereal flat bottom silos with central gravity discharge.
  • Possible fitting in existing silos without any modification to them.
  • Single center outlet; no need of intermediate outlets.
  • The unit, once installed, remains in the silo. Initially, the grain discharges by gravity into the central outlet and then into the independent recovering handling system.

Brou, Centre-Val de Loire • 33-2-37-97-66-11

Norstar Industries Ltd

ATLAS™ Sweeps

  • Two models available: Tractor Drive and Posi-Trac.
  • Up to 20,000 bph (500 MT/hr) for 60’ – 105’ bin diameters.
  • Offering an industry-exclusive UL Listed Collector Ring for unmatched bin safety.
  • Posi-Trac model offers true Zero-Entry operation with positive drive control panel.
  • Designed for long-lasting durability under commercial weight loads.
  • Tractor drive provides up to 1900 lbs of thrust with Posi-Trac model.

Morris, MB • 204-746-8200

Norstar Industries Ltd

Platinum Series

  • Fully integrated unload and sweep combination for true zero-entry total clean-out.
  • UL listed collector ring mounted above-floor on top of sweep motor mount.
  • Twin-Flight Center Sump on unload allows for power cables to be run up to the collector ring.
  • Up to 12,000 bph (300 MT/Hr) of unload capacity (30’ – 90’ bin diameters).
  • Up to 6,500 bph (165 MT/Hr) of sweep capacity (30’ – 90’ bin diameters).
  • Standard emergency sump to ensure efficient unload in case of bridging at center sump.
  • Standard and auto-drive control panels available.

Morris, MB • 204-746-8200

Norstar Industries Ltd

The Express Sweep

• An innovative blend of power and capacity built to provide cost-efficiency for heavy farm and light commercial duties.

• Up to 6,500 bph (165 MT/Hr) for 42’ – 105’ bin diameters.

• True zero-entry compatible with Norstar’s UL listed collector ring sump (optional).

• Motorized tractor drive with 18” gear reduction wheel for reliable traction and power.

• Skeletonized frame for durability when buried.

• Thicker-edged auger flighting for increased capacity and longevity.

• Standard and auto-drive control panels available.

Morris, MB • 204-746-8200

North American Equipment Co., Inc.

Luft Kanals Duct System for Aerating and Emptying Tanks

  • In use for 27 years in Canada, United States, and Mexico.
  • Any structure—any grain.
  • No moving parts inside the bin.
  • Greatly improves aeration.
  • Reduces bin labor and promotes safety.

Nortonville, KS • 800-514-7608

Springland Manufacturing

6021 Series Commercial Bin Sweeps

  • Zero entry.
  • Easy to install and operate.
  • Capacities from 3,000 to 20,000 bph.
  • Service from tunnel.
  • AutoSweep options available.
  • Hydraulic Positive Drive System (PDS) with angle track standard on commercial sweeps since 1989.
  • Direct drive means no belts, chains, tangled cables, or hoses.
  • Custom electric sweeps available to meet your requirements up to 105 ft. bins
  • Leading the industry in customer service, reliability, and efficiency for 30+ years.

Rivers, MB • 204-328-7358

Springland Manufacturing

6022 Hydraulic Series Commercial Sweeps

• Zero entry.

• Easy to install and operate.

• Ideal for retro-fit and new installations.

• Capacities from 3,000 to 10,000 bph+.

• Hydraulic power unit now includes AutoSweep valve block to keep your sweep operating at optimal efficiency.

• Hydraulic Positive Drive System (PDS) with angle track standard on Commercial Sweeps since 1989.

• Custom hydraulic sweeps available to meet your requirements up to 105 ft. bins.

• Leading the industry in customer service, reliability, and efficiency for 30+ years.

Rivers, MB • 204-328-7358

Sudenga Industries, Inc.

D Series Commercial Sweep

  • Zero-entry commercial grain sweeps for grain bins to 130 ft. in diameter.
  • 6,000 bph and 10,000 bph models.
  • Leads with the flighting for a “full-bite” in tough, stubborn grain.
  • Patented self-raising and lowering feature eliminates the need for personnel to enter bin prior to filling the bin or engaging the sweep. U.S. Pat. No. 8,616,823.
  • Sweep controlled from outside in.
  • Advances, stops, or reverses based on operator defined sweep fill level, ensuring the sweep empties the bin at an optimum rate.

George, IA • 888-783-3642

Variable Automation & Manufacturing

Bin Sweep Back Plate Brush

  • One-inch nylon brush that attaches to the bottom of a bin sweep.
  • Two-inch adjustment.
  • Nylon bristles provide excellent abrasion resistance, long self life, and bend recovery.
  • Available in 5-ft. sections.
  • Additional applications and configurations available.

Raymond, IA • 877-827-2434

Variable Automation & Manufacturing

Daay Bin Paddle Sweep

  • Designed to be fully submersed in grain and can unbury itself from a grain avalanche.
  • Maintains a low-dust environment.
  • Available for bins up to 105 feet.
  • Housing is made of 10-gauge painted steel allowing for eave heights up to 110 feet.
  • Super-tug tractor tread tires are foam-filled for extended durability.
  • The tires are designed to slip, which keeps the sweep from climbing the pile.
  • Designed to exceed the highest standard of safety.

Raymond, IA • 877-827-2434

Variable Automation & Manufacturing

V1 Automatic Push Tractor

  • Easy, cost effective bin sweep compliance.
  • Push tractor with controller automatically operates sweep augers.
  • Designed to keep employees out of grain bins during cleanout.
  • Will fit any existing model or size bin sweep. Complete new systems also available.
  • Models range in weight from 100 to 145 lbs.
  • Mobile and fits in any bin door.

Raymond, IA • 877-827-2434

Andco Actuators

Houston, TX • 800-945-9898

Behlen Grain Systems

Columbus, NE • 800-553-5520

Brock Grain Systems

Milford, IN • 866-658-4191

Buhler Inc.

Minneapolis, MN • 763-847-9900

Cleveland Grain Systems, Inc.

Mt Zion, IL • 800-313-2603

ERIKS - Kansas City

Kansas City, MO • 800-821-5578

ERIKS - Wichita

Wichita, KS • 800-835-0226


Assumption, IL • 888-GSI-BINS

Hawkeye Grain Systems Inc.

Hawkeye, IA • 563-427-3708

Honeyville Metal Inc.

Topeka, IN • 800-593-8377

Laidig Systems, Inc.

Mishawaka, IN • 574-256-0204


St-Bruno, Canada • 514-816-5668

Perry Equipment

Crawfordsville, IN 765-362-4495

Prairie Land Millwright Inc

Mendota • 815-538-3085

Premier Components, Inc.

Alma, MI • 877-681-3064

Ross Manufacturing Co.

Brownsville, TN • 800-874-1935

Sioux Steel Company

Sioux Falls, SD • 800-557-4689

Sukup Manufacturing Company

Sheffield, IA • 641-892-4222

Request More Information

All fields are required.

Please read the following: By submitting this request you are giving us (Grain and Feed Equipment) permission to store your information and respond to your request via email. We are committed to protecting your privacy and your data. You will be receiving a follow-up email where you can update your permissions and data use going forward. We encourage you to Opt-In so we can continue to provide with information regarding our products and services.

Company Directory

Equipment Directory