Product and Service Directory

Browse Companies  Browse Equipment


​Enclosed belt and drag conveyor systems efficiently transport grain from point A to point B at elevators and feed mills. Conveyors found on this page are available in a range of sizes ​with replacement parts and components for grain handling equipment. These manufacturers offer ​durable construction and solid designs developed for efficiency and reliability, reducing downtown and maximizing uptime. Request more information directly from the company.


To request more info, check the box(es), fill out the form below, and your request will be submitted.

AGI Hi Roller

Belt Conveyor Gate Accessory

  • UHMW-lined slide gates.
  • Cam follower bearing-supported gates.
  • Single-opening gates ormultiple-opening ladder gates.
  • Electric actuator-controlled or rack-and-pinion style with a right angle gear reducer.
  • Manual cleanout gates with hand wheels.
  • Inlets designed to enclose the underside of the gate fully to prevent dust escape.

Sioux Falls, SD • 800-328-1785

AGI Hi Roller

Enclosed Belt Conveyors

  • Feature rich.
  • Totally enclosed, self-cleaning and reloading.
  • Spiral winged tail pulleys extend belt life.
  • Over 40 years of experience and innovation.
  • Maintenance friendly.

Sioux Falls, SD • 800-328-1785

AGI Hi Roller

Hi Life

  • Most durable idler available on an enclosed belt conveyor.
  • All bearings isolated from the internal atmosphere of the conveyor.
  • Self-cleaning and reloading.
  • Capacities to 220,000 cubic feet per hour.

Sioux Falls, SD • 800-328-1785

AGRA Industries


AGRA screw feeders and live bottoms are reliable and robust.

  • Carbon or stainless.
  • Inverter duty motors.
  • Variable pitch flighting.
  • Standard sizes from 4 in. up to 18 in.
  • Square, rectangular, or circular inlets and discharges.

Merrill, WI • 800-842-8033

AGRA Industries


AGRA conveyors are hard at work in processing facilities worldwide. Our durable construction and robust designs are developed to exceed your demands for efficiency and uptime reliability.

  • 3-Roll.
  • Tube.
  • Pan idler.
  • Vibratory.
  • Dryer fill (tripper/shuttle).
  • Bulk storage fill (tripper/shuttle).

Merrill, WI • 800-842-8033

BCI - Bulk Conveyors Inc.

Material Handling Equipment

• HD chain conveyors




• Bucket elevators

• Spare parts

- Conveyor chain/sprockets

- UHMW flights

- Belt/buckets

- Chain breakers

Wichita, KS • 316-201-3158


Smart Conveyors™

• Drag-style, twin-chain

conveyors that run chains in dedicated channels outside

the product path.

• Half the power requirement of other systems.

• “Piano key” paddles limit stress on the paddle system.

• Versatile configurations allow for construction at

high angles, up to 90 degrees from horizontal.

• Low internal friction reduces maintenance and

enables smaller motors, reducing energy use.

• Minimal metal-to-metal contact for quiet


Brock Grain Systems

Drag Conveyors

  • Brock’s Easy-Flo and Sur-Flo Drag Conveyors are available in a range of sizes to suit any facility’s needs and capacities up to 40,000 bushels (1,089 metric tons) per hour.
  • Brock’s Curved Incline Drag Conveyors can meet the need when applications require a steeper incline than the normal 10° maximum incline.
  • Both Brock conveyor systems are reliable and long-lasting products designed for 24/7 operation.

Milford, IN • 866-658-4191

Buhler Inc.

LBIA Enclosed Belt Conveyor

• Tensioning station with product inletMultiple conveyor inlets and intermediate outlets for product.

• Specially designed idlers and the return of material through the enclosed belt conveyor.

• Low energy consumption per ton of product conveyed.

• Operational safety and failure monitoring.

• Quick replacement of key parts.

Stockton, CA • 209-983-8400

Chief Agri

Material Handling

  • Bucket elevators, horizontal chain conveyors, incline conveyors.
  • Heavy construction for years of service.
  • Capacities up to 60,000 bph.
  • Part of the Chief family of products.

Kearney, NE • 308-237-3186

Gerbers of Montana

STRONG SCOTT KleenFlo Drag Conveyors

  • New product from Gerbers of Montana.
  • Round bottom design.
  • Completely self-cleaning and self-cleaning tail terminals.
  • 6 in. through 20 in. sizes.
  • Available with manual, pneumatic or hydraulic curved discharge gates.
  • Engineering and design capabilities.
  • Call for pricing and availability.

Great Falls, MT • 406-727-2203

Grain Belt Supply Co. Inc.

Drag Conveyors

  • Flat bottom and round bottom.
  • Horizontal or incline designs.
  • Capacities to 50,000 bph.
  • Move grain fast and efficiently with less horsepower than a screw conveyor.
  • Minimize breakage with limited metal to grain contact.
  • Sealed design to contain dust and reduce moisture.
  • Trough lengths available up to 20 ft., standard length is 10 ft.
  • Component parts are fabricated with CNC laser and brakes for precision fit and ease of installation.

Salina, KS • 800-255-2742

Honeyville Metal

Drag Conveyors

  • Capacities up to 26,000 bph in galvanized or stainless steel construction.
  • Horizontal enmasse with optional ar-200 bottom and side liners.
  • 45° Incline farm line with pit hoppers and grates, optional ar-200 bottom liners.
  • 45° Incline industrial line with pit hoppers and grates, optional ar-200 or 400 bottom and side liners.
  • 45° Incline reclaim under grain bin floor with gates, optional ar-200 bottom liners.
  • All bolted construction for easy installation and service.
  • Uhmw flights bolted to chain attachments, chain and paddles factory installed in horizontal drag trunk sections.
  • Class II gears reducers, drives and guards factory installed.

Topeka, IN • 800-593-8377

KC Supply Co. Inc.

Conveyor Systems

  • Complete systems or parts.
  • Belt, drag, or screw conveyor.
  • AR steel and UHMW liners as well.

Kansas City, MO • 800-527-8775


Bulk Seed Systems

  • Complete conveying, handling, scaling, automation, and seed treatment equipment for bulk seed systems.
  • Patented cleated belt design, conveyor drive configuration, and automation technology.
  • Innovative conveyor design emphasizing gentle seed handling, high-capacity transfer, accurate scaling, and simple operation.
  • High-quality conveyor and equipment construction, including powder-coated paint and galvanized steel with complete enclosed return.
  • Full manufacturer support and service.

Cissna Park, IL • 888-574-3277


Cleated Belt Seed Conveyors

  • Patented cleated belt design and conveyor drive configuration for gentle seed handling and maintaining capacity at steep angles.
  • Electric, hydraulic, or PTO drive options.
  • Lengths from 17’ to 82’.
  • Capacities from 1,000 to 6,000 bph.
  • High-quality construction, including powder-coated paint and galvanized steel with complete enclosed return.
  • Full manufacturer support and service.

Cissna Park, IL • 888-574-3277

LeMar Industries

Grain Transport Conveyors

• Unload trucks quickly and safely during the busy harvest season using just one employee.

• The LeMar Model 25000 Transport Conveyor can help turn long truck lines into NO lines with its amazing unloading capacity of 25,000 bph.

• Both the LeMar 15,000 and 25,000 bph models feature a fail-safe hydraulic system with:

  • Industry exclusive directional grain diverter.
  • Height adjustability.
  • Hydraulic drive-over ramps for fast truck dumping.
  • Massive hydraulic drive wheels.

Des Moines, IA • 515-266-7264

Lundell Plastics Corp.

Modular Plastic Screw Conveyor

  • Cup design available in 5", 6", 7", 9", and 12" diameters for the gentle handling of bulk seed.
  • Standard straight flight design available in 2", 3", 4", and 5 5/8" diameters.
  • Injection molded for consistent quality – each module is assembled into a stainless steel or mild steel center tube.
  • Interlocking lap joint (patented) – produces a sustainably smooth, strong and continuous surface.

Odebolt, IA • 877-367-7659

Lundell Plastics Corp.

UHMW Wear Shoes for Augers

  • Extends life of steel augers.
  • Pre-form UHMW to fit onto new or worn steel auger flighting.
  • Available in different diameters, pitches and thickness to fit most common augers.
  • Pre-drilled and pre-formed for easy installation.

Odebolt, IA • 877-367-7659

Morgan Plastic Fabrication


  • Drag conveyor flights and rollers.
  • Wear strips and wear plates.
  • Custom fabrication for special design parts.
  • UHMW—FDA approved virgin and antistatic materials.
  • Food grade nylons.
  • Industrial nylons, and plastics.
  • Committed to quality products and service.
  • Continuous product testing and improvement program.
  • Fax or send a drawing or provide an unused part for a prompt quote on price and delivery.
  • CNC machining

Lexington, NE • 308-324-4844

Newell Machinery Co. Inc.

Drag Conveyors

  • Enmasse and bulkflow designs.
  • Capacities to 120,000 bph and above.
  • Designed for your application and product.
  • Available in vapor and liquid tight; horizontal, inclined, L-path, S-path, loop, and many other custom designs.
  • Easy maintenance and installation.
  • Built for years of service.
  • In business since 1900.

Hiawatha, IA • 319-393-1610

Norstar Industries Ltd

Chain Conveyors

  • Two models available: En-Masse and Incline.
  • En-Masse capacities up to 60,000 bph.
  • Incline capacities up to 40,000 bph.
  • AR200, AR400, or UHMW liner packages.
  • Self-cleaning tail section.
  • Drive-over pits and inlet options available.
  • Slide gates and discharge options available.

Morris, MB • 204-746-8200

Norstar Industries Ltd

Chain Loops and Twin Lines

• Gentle on product.

• Fill, blending or transfer multiple bins - with just one operator.

• Capacities: up to 10,000 bph.

Morris, MB • 204-746-8200

Perry Equipment

Augers, Screw Conveyor Screws, Troughs, and Accessories

Standard and custom augers.

Screw conveyor screws, trough, and accessories.

Mounted augers – 4 to 14 in., 20 ft. lengths in stock.

Angle rings.







Trough liners.


Crawfordsville, IN 765-362-4495

Rapat Corporation

ETR Enclosed Belt Conveyor

  • Heavy-duty construction.
  • Access doors and removable hoods for easy maintenance.
  • Troughing idlers for maximum capacity and reduced overall friction.
  • Optional single or multiple intermediate discharges.

Hawley, MN • 800-325-6377

Rapat Corporation

Gerber 'Smooth-Flow' Drag

  • Exclusive 1/2 in. polyethylene flights and an overload shut off.
  • All controls located at the drive end for faster, easier maintenance.
  • Custom conveyor systems available.

Hawley, MN • 800-325-6377

Rapat Corporation

Series CU Conveyor

  • Car Unloader conveyor for unloading bulk materials such as beans, grains, sand, and fertilizer from controlled-opening hopper-bottomed railcars and trailers.
  • Built for rugged use, handling up to 90 tons of material per hour on the 24 in. wide belt, and 120 tons of material per hour on the 30 in. wide belt.
  • Equipped with a wheeled undercarriage, located at the conveyor’s balance point for convenient one-person positioning.

Hawley, MN • 800-325-6377

Rapat Corporation

Series F Conveyor

  • Rubber belt conveyor designed for gentle handling of bulk materials such as seed, beans, fertilizer, earcorn, etc.
  • Can elevate up to a 40 degree incline.
  • Rubber flights are hot vulcanized to the rubber belt and convey the materials without cracking or grinding.

Hawley, MN • 800-325-6377


Bulk Flow Conveyors

  • Customizable applications available.
  • Rigid, maintenance friendly construction.
  • Abrasion resistant, and stainless steel elements.
  • Dust tight UHMW seals (mechanical and vapor seals available).
  • Adjustable and accessible.

Centralia, IL • 410-546-0811

Ross Manufacturing Co.

Drag Conveyors

  • Heavy-duty steel sprockets.
  • Pillow block bearings.
  • Return idlers.
  • UHMW paddles.
  • Capacities up to 30,000 bph.
  • Flat bottom (top)
    Round bottom (middle)
    High flight (bottom)

Brownsville, TN • 800-874-1935

Schlagel, Inc.

EZ-Roll™ Enclosed Belt Conveyor

  • The trough bottom is lined with segments of anti-static UHMW mounted to allow for thermal expansion and contraction.
  • Head and tail shaft bearings are shimmed and fully adjustable.
  • The standard take-up tail used two oversized, plated ACME screws in a relubricateable brass nut. Rear access allows 360-degree wrench swing. Take-up housing support arms slide on UHMW guides.

Cambridge, MN • 800-328-8002

Schlagel, Inc.

Powerflow Conveyor

  • En-masse conveying delivers high volumes of material utilizing a minimum amount of space.
  • The detector tail terminal automatically adjusts chain tension and will sense excessive chain slack.
  • The EZ-Glide chain return system is standard on most models.
  • A variety of standard models are offered – capacities up to 60,000 bph.
  • Standard painted mild steel construction; also available in galvanized, and stainless steel.
  • A variety of inlets are available to fit your application.
  • Plugged head switches and speed sensors are available upon request.

Cambridge, MN • 800-328-8002

Schlagel, Inc.

Round Bottom Drag Conveyor

  • Sizes 6 in. through 24 in. available, mild steel, galvanized, or stainless steel.
  • All steel roller chain for most applications.
  • Large size flight attachment brackets.
  • Can be retrofit into existing conveyor trough.

Cambridge, MN • 800-328-8002

Screw Conveyor Corporation

Super-Flo® Conveyors

• Known for gentle material handling, minimal particle degradation and separation, and self-cleaning.

• Super-Flo® conveyors come in 8 sizes from 6 inches through 24 inches with capacities from 1,890 to 25,765 cfh.

• The units are completely enclosed to keep dust at a minimum.

• They possess low initial cost and low energy requirements resulting in more economical operation.

Hammond, IN • 800-626-6629

Sudenga Industries, Inc.

Drag Chain Conveyors

  • Standard capacities from 2,000 to 30,000 bph.
  • Horizontal, inclined, low profile (a Sudenga innovation), drive over, double run models available.
  • Modular design fits many applications.
  • Galvanized sections are standard.
  • Variety of liner options available.
  • High quality components maximize wear life and minimize downtime.

George, IA • 888-783-3642

Sudenga Industries, Inc.

Portable Drive Over Hopper (PDOH 125)

  • Capacities of 7,500, 10,000, or 12,500 bph.
  • Heavy gauge steel construction throughout.
  • Unload from straight trucks, semis, and gravity wagons! Proven low-profile design. Durable drag chain conveyor format.
  • Discharge neck extensions are available that increase discharge heights allowing the PDOH 125 to feed into different portable or stationary receiving equipment.

George, IA • 888-783-3642

Sukup Manufacturing Company

Drag Conveyors

  • Capacities up to 60,000 bph.
  • Heavy-gauge, galvanized steel construction.
  • Patented dust-proof and weather-tight covers.
  • HD engineered chain with 1/2 in. UHMW flights.
  • Shaft, sprocket, and bearings can be easily removed as one piece.
  • Split sprocket with hardened teeth.

Sheffield, IA • 641-892-4222

The Essmueller Company

Flat Bottom Drag

  • Capacities up to 40,000 cfh.
  • UHMW flights with steel chain.
  • 10 gauge bolted bottoms and 14 gauge flat cover standard.
  • Painted, stainless steel, and galvinized.

Laurel, MS • 800-325-7175

The Essmueller Company

Model SF Screw Feeders

  • Complete factory assembly—saves on construction costs.
  • Range in length from 10 to 30 ft.
  • Standard trough diameters from 4 to 24 inches.
  • Available in single, double, triple, and live bottom configurations.
  • CEMA standardized components selected based on the material to be handled.
  • Troughs may be double-flanged or angle-flanged. Tapered trough and flighting near the inlet is optional.

Laurel, MS • 800-325-7175

The Essmueller Company

Round Bottom Drag-Flite

  • Capacities up to 52,500 cfh.
  • Unique sproket return idler system.
  • UHMW flights with steel chain available.
  • Painted, stainless steel, and galvanized.

Laurel, MS • 800-325-7175

Universal Industries Inc.

Uni Tube® Tube Conveyors/Field Loaders

  • Drive over conveyors for fast truck unloading; 1500 Series capacities up to 7,500 bph and 2200 Series capacities up to 12,000 bph.
  • 1500 Series tube conveyors with 15 in. belt in 10 in. tubing; capacities up to 6,000 bph. Available in Short Field Loader®, field loader, and standard tube conveyor tails.
  • 1800 Series Field Loader and Short Field Loader®, with 18 in. belt and 12 in tubing; capacities up to 9,000 bph.
  • 2200 Series tube conveyors with 22 in. belt and 14 in. tubing; capacities up to 10,000 bph. Available in Short Field Loader®, field loader, and standard tube conveyor tails.

Cedar Falls, IA • 800-553-4446

Universal Industries Inc.

UniVey® Belt Conveyors

  • Slide and idler applications to suit a wide variety of industries and capacities.
  • Capable of handling your bulk materials in both horizontal and incline orientations.
  • Available in lengths and widths to accommodate job requirements.
  • Wide range of belt types/materials to fit applications.
  • Structurally sound frames made from carbon, galvanized, or stainless steel.

Cedar Falls, IA • 800-553-4446

Warrior Mfg., LLC


Enclosed Belt

• Heavy-duty idlers.

• Anti-static UHMW bottoms.

• Capacities up to 80,000 bph.

• Reversing, two-way heads, movable plow.

Drag Conveyors

• Capacities to 40,000 bph.

• En-masse and L-Path styles.

• Variety of AR liner packages.

• Standard welded steel chain.

• Heavy-duty, robust designs.

• Available in hot-dipped galvanized, painted, and stainless construction.

Hutchinson, MN • 320-587-5505

Advance Millwrights Inc.

Elmira, Ontario, Canada • 519-669-4200

AGI Tramco

Wichita, KS • 316-264-4604

American Fabric Filter Co.

Wesley Chapel, FL • 800-367-3591

Applied Power Products

Lakeville, MN • 888-367-2358

Argonics, Inc.

Gwinn, MI • 906-226-9747

Baasch & Sons, Inc.

Cairo, NE • 308-485-4661

Bailey-Parks Urethane

Memphis, TN • 800-238-7638

Bjerke Brothers, Inc.

Buxton, ND • 701-847-3125

Boss Products LLC

Schertz, TX 210-664-4200


Des Moines , IA • 800-247-6755

Bruce Martin Construction Inc

Portageville, MO • 573-379-5776

Buhler Inc.

Minneapolis, MN • 763-847-9900


Newton, KS • 800-835-2526

C-TEC Mechanical



Humboldt, IA • 515-332-4045

Christianson Systems, Inc.

Blomkest, MN • 800-328-8896

Cobalt Chains, Inc.

East Peoria, IL • 309-698-9250

Conveyor Components Co.

Croswell, MI • 800-233-3233

Creamer Metal Products

London, OH • 800-362-1603

Crippen Northland Superior Supply Co.

Winnipeg, MB • 204-925-6141

CSE Bliss Manufacturing, LLC

Ponca City, OK • 580-324-3892

DYNATEK Loading Systems

North Prairie, WI • 262-392-2162

Electro-Sensors, Inc.

Minnetonka, MN • 800-328-6170

Elevator Services & Storage, Inc.

Beaverdam, OH • 419-643-5111


Erie, PA • 814-835-6000

FWS Group of Companies

Winnipeg, MB • 204-487-2500

Grain Flo, Inc.

Heyworth, IL • 800-842-4875

Hawkeye Grain Systems Inc.

Hawkeye, IA • 563-427-3708

Industrial Magnetics, Inc.

Boyne City, MI • 888-582-0821

Innovative Grain Systems

Jonesboro, AR 870-340-2777

Iowa Elevator Systems & Service Inc.

Carlisle, IA • 515-989-0679

J & D Construction, Inc.

Montevideo, MN • 800-279-6447

Koehl Bros

Fairbury, IL • 815-692-2326

Mid-States Material Handling & Fabrication


Pneumat Systems

Mankato, MN • 507-345-4553

Premier Components, Inc.

Alma, MI • 877-681-3064

Process Control Systems, Inc.

Chaska, MN • 800-328-0738

S.W. Vac Inc.

Willmar, MN • 800-366-8665

Salina Scale Sales & Service Inc

Salina, KS • 800-828-1634

Scott Equipment Company

New Prague, MN • 952-758-2591

Southern IL Scale

Noble, IL • 800-441-1794

Tandem Products, Inc./Rhino Hyde Div.

Minneapolis, MN • 800-533-0509

TCR Systems LLC

Decatur, IL • 217-877-5622

Union Special

Huntley, IL • 800-344-9698

Walinga USA Inc.

Wayland, MI • 800-466-1197

Walt Johnson Construction Inc.

Alexandria, MN • 320-763-9005

4B Components Ltd.

Morton, IL • 309-698-5611

Request More Information

All fields are required.

Please read the following: By submitting this request you are giving us (Grain and Feed Equipment) permission to store your information and respond to your request via email. We are committed to protecting your privacy and your data. You will be receiving a follow-up email where you can update your permissions and data use going forward. We encourage you to Opt-In so we can continue to provide with information regarding our products and services.